SteelRat
Dominant
- Joined
- Mar 23, 2006
- Posts
- 362
- Location
- Riga, Latvia
- Society
- "The House of Lords"
Hey there,
Im a hunter, but i decided to get my feet into some mining
So below are my 1st run of 100 probes. (all on Amethera, untaxed land)
Equipment: Finder F-105
Extraxtor RE-104 (both maxed)
Drops Ore: 100
Drops Enm: 0
Hit Ration: 25 %
Depth (min / avg / max): 295 / 540.5 / 733
Finder / Extractor repairs: 3.78 PED
Total expences: 103.78 PED
TT in:
Lysterium Stone: 40.20 PED
Durulium Ston: 20.00 PED
Gazzudite Ston: 3.25 PED
Kanerium Ore: 2.50 PED
Cobalt Stone: 2.40 PED
Total: 68.35 PED (tt)
So what are my thought in my 1`st impressions:
- need to to loads of exploring for areas what have no mobs / Low aggro mobs.
- i see that my avg depth was 540.5, while a maxed F-105 avg is 522.4, so that`s reallly precise. Does that mean that i have to look for ores that usually are found in 450 - 600 m depth ? (looking at LBML site that Lysis is found avg 617 , and that explains why i had most of it, right?)
- How to combine the resource maps with the Finder i use: (is this correct): let`s say i want to go and find Durulium Stone, the LBML say that the avg depth is 788, with min 291 and max 1520) So i find a swerver area that has hi % of that stone in it and exuip a finder that is close to 788 avg depth ? (something like iplex TK220 Seeker (L) with avg depth of 776.1, for example)
If the above is correct, then not always i should aim for max depth, right ? i should look what resources there are in the area and based on that i should cheese a Finder ?
Will do 100 probes with the same equipment in another location, will be interesting to compare. Will get back to you guys
TY.
Im a hunter, but i decided to get my feet into some mining
So below are my 1st run of 100 probes. (all on Amethera, untaxed land)
Equipment: Finder F-105
Extraxtor RE-104 (both maxed)
Drops Ore: 100
Drops Enm: 0
Hit Ration: 25 %
Depth (min / avg / max): 295 / 540.5 / 733
Finder / Extractor repairs: 3.78 PED
Total expences: 103.78 PED
TT in:
Lysterium Stone: 40.20 PED
Durulium Ston: 20.00 PED
Gazzudite Ston: 3.25 PED
Kanerium Ore: 2.50 PED
Cobalt Stone: 2.40 PED
Total: 68.35 PED (tt)
So what are my thought in my 1`st impressions:
- need to to loads of exploring for areas what have no mobs / Low aggro mobs.
- i see that my avg depth was 540.5, while a maxed F-105 avg is 522.4, so that`s reallly precise. Does that mean that i have to look for ores that usually are found in 450 - 600 m depth ? (looking at LBML site that Lysis is found avg 617 , and that explains why i had most of it, right?)
- How to combine the resource maps with the Finder i use: (is this correct): let`s say i want to go and find Durulium Stone, the LBML say that the avg depth is 788, with min 291 and max 1520) So i find a swerver area that has hi % of that stone in it and exuip a finder that is close to 788 avg depth ? (something like iplex TK220 Seeker (L) with avg depth of 776.1, for example)
If the above is correct, then not always i should aim for max depth, right ? i should look what resources there are in the area and based on that i should cheese a Finder ?
Will do 100 probes with the same equipment in another location, will be interesting to compare. Will get back to you guys
TY.