Menu
What's New
By:
Filters

Info: Simple I Plastic Ruds logging

S

snake_eyes

Prowler
Joined
Aug 6, 2006
Posts
1,482
Society
NBK Entrepreneurs
Avatar Name
antony one2watch jones
Having followed the following thread

https://www.planetcalypsoforum.com/forums/crafting/166298-my-metal-ruds-log.html

I've decided to run my own little logging thread to compare my results to his. Be interesting to see how they go. As i've mentioned in the above thread am currently roughly 400 ped and a little over 52qr. I have just bought some resources so will go do my first run now and report back shortly.
 
1st logged run

Blueprint Quality Rating: 52.6

Input

1600 Thyroid Oil 160ped tt
1400 Animal Eye Oil 70ped tt
Total Cost 230ped tt

Blueprint Quality Rating: 53.7
Output
227 Ruds 113.50ped tt
6660 Animal oil residue 66.60ped tt
6 Thyroid Oil 0.60 ped tt
131 Animal Eye Oil 6.55ped tt
Total Output 187.25ped tt

Profit/Loss -42.75
Overall Profit/Loss -442.75

Comments:

A typical run for me on this print. Nothing much more to report.
 
Last edited:
good luck Snake ;)

I love these threads. The more info the better.

C
 
Blueprint Quality Rating: 52.6

Input

1600 Thyroid Oil 160ped tt
1400 Animal Eye Oil 70ped tt
Total Cost 230ped tt

Blueprint Quality Rating: 53.7


Output


227 Ruds 113.50ped tt
6660 Animal oil residue 66.60ped tt
6 Thyroid Oil 0.60 ped tt
131 Animal Eye Oil 6.55ped tt
Total Output 187.25ped tt




Profit/Loss -42.75


Overall Profit/Loss -442.75



Comments:


A typical run for me on this print. Nothing much more to report.[/QUOTE]
 
2nd logged run

Blueprint Quality Rating: 53.7

Input

1600 Thyroid Oil 160ped tt
1400 Animal Eye Oil 70ped tt
Total Cost 230ped tt

Blueprint Quality Rating: 54.3
Output
213 Ruds 106.50ped tt
10141 Animal oil residue 101.41ped tt
4 Thyroid Oil 0.40 ped tt
148 Animal Eye Oil 7.40ped tt
Total Output 215.71ped tt

Profit/Loss -14.29
Overall Profit/Loss -457.04

Comments:

Better than the first run.
 
GL, i think results should be very similar... I think the only variation should be whoever gets the HOFs.
 
LeWolf86 said:
GL, i think results should be very similar... I think the only variation should be whoever gets the HOFs.
Click to expand...


well it would be interesting comparing our skill levels and the results we get. Maybe we could both choose the same qr 1 print next after this and see how we fare. My current skill levels are:

Electronics 20
Mechanical 19
Metal 18
 
3rd logged run

Blueprint Quality Rating: 54.3

Input

1600 Thyroid Oil 160ped tt
1400 Animal Eye Oil 70ped tt
Total Cost 230ped tt

Blueprint Quality Rating: 55.1
Output
208 Ruds 104.00ped tt
5116 Animal oil residue 51.16ped tt
7 Thyroid Oil 0.70 ped tt
122 Animal Eye Oil 6.10ped tt
Total Output 161.96ped tt

Profit/Loss -68.04
Overall Profit/Loss -525.08

Comments:

Again another typical run for me on this print. It isn't a very luck bp for me. I get the feeling this is going to be an expensive print for me to get to qr100. unless I hit some nice runs when the qr hits 70 (if peoples theories surrounding a bp's sweet spot being 70-80 hold any weight)
 
Good luck! :yay:

It took me a lot of clicks and a lot of peds to get my Simple I Ruds bp to qr 100. This wasn't a very luck bp for me either, only got one small HOF around qr 80 if I recall correctly. I haven't logged my runs but I'm sure it was a big overall loss. Did better with my Simple I (and II) Conductors.
 
snake_eyes said:
well it would be interesting comparing our skill levels and the results we get. Maybe we could both choose the same qr 1 print next after this and see how we fare. My current skill levels are:

Electronics 20
Mechanical 19
Metal 18
Click to expand...


hahahah

Well you beat me by about 10 levels in each category :D.

Level 11 Metal Engi
Level 8 Mechanical
Level 8 Electronic
 
LeWolf86 said:
hahahah

Well you beat me by about 10 levels in each category :D.

Level 11 Metal Engi
Level 8 Mechanical
Level 8 Electronic
Click to expand...

Would give a good indication of what difference if any skills do make then. We will definitely have to select a qr 1 print at some point to test things out.
 
I think overall we can see.... look at your results compared to mine... nothing really that noticeable....

Ill be doing conductors II pretty soon... need to get electronic up to maybe lvl 12.5 would be perfect for maxed COS on skills... but might start earlier so I can reap some SIB... even though success might be a bit off.
 
4th logged run

Blueprint Quality Rating: 54.3

Input

973 Thyroid Oil 97.30ped tt
849 Animal Eye Oil 42.45ped tt
Total Cost 139.75ped tt

Blueprint Quality Rating: 55.6
Output
139 Ruds 69.50ped tt
3261 Animal oil residue 32.61ped tt
1 Thyroid Oil 0.10 ped tt
26 Animal Eye Oil 1.30ped tt
Total Output 103.51ped tt

Profit/Loss -36.24
Overall Profit/Loss -561.32
 
Zmason said:
Looks like the ruds aren't being very nice to you.... lol
Click to expand...

nope they aren't. The peds will come back eventually (to a max of 90% tt outlay). Either through ruds or other blueprints I craft. I'm a strong believer in a personal loot pool.
 
You must log in or register to reply here.
Back
Top