Tier 5 Mod Viceroy

Ranyard

Old Alpha
Joined
Jan 6, 2008
Posts
819
Location
Genisis A 19G
Society
Shaolin
Avatar Name
Ranyard Rany Ranyhyn
What is needed to tier from 4 to 5 for this armor?

Thanks!!
 
Not sure but it’s pretty easy to calculate. The TT quantities are simply the addition of the Tier 4 stage plus Tier 1 stage.

Then for the specific materials, check the wiki for other armours that people have recorded at Tier 5, it will be the same.
 
What is needed to tier from 4 to 5 for this armor?

Thanks!!
Basically every tier up cost same amount of tt in materials.

So if it took 200tt of tier 4 components to get 3=>4,it will take 200tt of tier 5 components for 4=>5
 
Basically every tier up cost same amount of tt in materials.

So if it took 200tt of tier 4 components to get 3=>4,it will take 200tt of tier 5 components for 4=>5
This is wrong, tier cost is tier x tier 1 cost. So tier 4 is 4x tier 1 cost in tt.
 
This is wrong, tier cost is tier x tier 1 cost. So tier 4 is 4x tier 1 cost in tt.
I'm actually just wanting to know what mats are needed, not what they cost.
 
I dont have a set rdy for tiering but based on the tier costs of previous levels and the mats of t5 I'm guessing something close to this. Tell me iff I'm far off when u get there :)

guestimate:
Erdorium Ingot - 21,6ped
Angelic flakes - 15ped
Pile of emeralds - 21,9ped
Blazar fragments 245 fragments
Tier 5 components. 13,6ped
 
I dont have a set rdy for tiering but based on the tier costs of previous levels and the mats of t5 I'm guessing something close to this. Tell me iff I'm far off when u get there :)

guestimate:
Erdorium Ingot - 21,6ped
Angelic flakes - 15ped
Pile of emeralds - 21,9ped
Blazar fragments 245 fragments
Tier 5 components. 13,6ped
Don't forget to multiply by 7 for a full set
 
You can calculate tier costs very precisely for any item if you have a record of previous tiers preferably blazar as it's most precise and a reference item that has been tiered to your target tier and the tier you have recorded.
There is also a rough estimate table of tt increase per tier but I only have it for weapons have not bothered for armor.
 
You can calculate tier costs very precisely for any item if you have a record of previous tiers preferably blazar as it's most precise and a reference item that has been tiered to your target tier and the tier you have recorded.
There is also a rough estimate table of tt increase per tier but I only have it for weapons have not bothered for armor.
actually looking into it a bit the other method is even more precise and works for anything as long as you know any previous tier, just need to look up the tier value per stackable
tt costs are increasing with the following increments (proportional for all stackables used)
T2/T1=2/1 = *2
T3/T2=3/2 = *1.5
T4/T3=4/3 ~ *1.333
T5/T4=5/4 = *1.25
T6/T5=6/5 = *1.2
T7/T6=7/6 ~ *1.167
T8/T7=8/7 ~ *1.143
T9/T8=9/8 = 1.125
T10/T9=10/9 ~ 1,111

so for mod viceroy t5 and t6 should be (done quickly perhaps made an error if so sorry for that)
-T5---------------------------------------------------------
t5 7x29
Erdorium 7x15
Angelic Flakes 7x12
emeralds 7x61
blazar 7x245
-T6---------------------------------------------------------
t6 6 7x27
quantium 7x12
putty 7x19
emeralds 7x73
blazar 7x294
 
So, I found my notes for T4:

Erdorium Ingot 12
Magerian Spray 20
Pile of Opals 73
Blaz 196
T4 34

Getting close to seeing T5 upgrade
 
Please keep your records for wiki!
If you cannot enter them yourself, please feel free to contact me, I am happy to help.
 
Dirt cheap! my set is T7 now
 
so for mod viceroy t5 and t6 should be (done quickly perhaps made an error if so sorry for that)
-T5---------------------------------------------------------
t5 7x29
Erdorium 7x15
Angelic Flakes 7x12
emeralds 7x61
blazar 7x245
-T6---------------------------------------------------------
t6 6 7x27
quantium 7x12
putty 7x19
emeralds 7x73
blazar 7x294
This is correct for T5, 1 of my parts is ready and I checked it. So it should also be right for T6

Thanks!
 
Back
Top